Anti-Slip Coatings

Safe Tread Anti Slip Coating – Safety Colors



SKU: N/A Category: GTIN: * Please Select a Color

Safe Tread Anti Slip Coating – Safety Colors

Anti-slip coating, Non-Skid Coating, Non-Slip Coating—this description is generic, and we call the concept by many names, but to increase traction, prevent slips or falls, and generally create a safe footing, that’s precisely what our products do best!

Safe Tread can create an anti-skid floor treatment, nonskid stair treads, high grip loading ramps, and top walkways for flat roofs. It’s so easy to apply; roll it on with a texture roller, creating a beautiful texture! It’s a maximum grip coating that’s environmentally and user-friendly. It creates an incredibly effective anti-slip, non-skid surface on clean, dry, prepared substrates. Safe Tread is flexible, so it’s chip, scuff, and impact resistant, which means a long service life. It cures by evaporation, and air dries quickly while it’s also NONFLAMMABLE for safe application. While we provide Safe Tread in several standard colors, we can match almost any color so you can enjoy a unique color scheme. It contains no Silica, so it’s user-friendly! And it’s a ZERO VOC product.

Reasons Why Many Use Safe Tread Anti-Slip Coatings:

Safe Tread is a unique anti-slip coating because it contains no silica, which can cause respiratory problems. The heavy grit that provides superior traction and non-slip properties will not settle out in the container or clump during application. It’s very easy to apply, it’s water-based, so cleanup is easy, and it does not require exotic safety equipment for a safe application. Considering the ease of use, easy water cleanup, and no expensive safety equipment, solvents, or reducers required, Safe Tread is much cheaper than most other coating options.

Where To Use Safe Tread Anti-Slip Coatings:

Safe Tread has proven tough enough for a variety of applications. Its anti-slip Coatings will withstand extreme service environments and deliver uncompromised performance.

  • Military Installations
  • Hospitals
  • Subway Cars
  • Public School Ramps
  • Forklift Ramps
  • Locomotives

Material costs are generally between $0.75 to $1.50 per square foot, depending on the applied rate and the chosen color.

For optimal results, we recommend using our texture rollers. 


Product SKU GTIN
Green 1 Gallon SATSAF-1-SAFGRE 810094631116
Green 5 Gallons SATSAF-5-SAFGRE 810094631123
Orange 1 Gallon SATSAF-1-SAFORG 810094630683
Orange 5 Gallons SATSAF-5-SAFORG 810094630690
Red 1 Gallon SATSAF-1-SAFRED 810094630706
Red 5 Gallons SATSAF-5-SAFRED 810094630713
Yellow 1 Gallon SATSAF-1-SAFYEL 810094630553
Yellow 5 Gallons SATSAF-5-SAFYEL 810094630560

Additional information

Weight 64 lbs
Dimensions 12 × 12 × 15 in
Safety Colors

, , ,



Technical Info



ONE COMPONENT WATER-BASED (No mixing, no measuring needed!)

  • Vehicle: Proprietary Blended TerPolymer Latex
  • Solids Volume: 61%
  • Texture Yield: 85% of wet film when dried
  • Wt / Gal.: 11.2#
  • V.O.C.: 0.00# / gal (0.0g/L), = ZERO V.O.C.
  • Cures by: Air Drying
  • Visc: 12 to 15 Kcps
  • Fillers: High Tensile Strength Suspended Grit
  • Toxicity: NON-TOXIC & relatively odorless.


  • UV Resistant – Shelf Life: >1 yr – High Adhesion (ASTM D-4541-95)
  • Fire Resistant – Low Sheen Finish – Hot Tire Resistant
  • Impact Resistant (ASTM D-2794) – Wear Resistant (ASTM F-510)
  • Available in: 1 or 5 gallon pails.
  • Spread Rate: 40 to 80 SF/Gal total in 2 coats.


Click here for some important information: Soft Tread & Safe Tread Application Guide


Safe Tread can be applied at surface temperatures between 50°F and 110°F. Application is not recommended when surface temperature is below 50°F or soon to fall below that temperature. Prepare surfaces by pressure washing and removal of all dirt, grease, loose paint, rust, efflorescence or other contaminants. Etch new concrete after 30 day curing, sand fiberglass, prime bare metal or wood. All surfaces must be clean, dry and “paint ready” before application. All new treated wood must be seasoned, or weathered, for a minimum of 6 months before applying Safe Tread Anti-Slip Coating. Composite lumber must be rigorously pressure washed prior to application and will require a special high adhesion primer. Call us for more info about composite lumber applications.

Mask off area to be coated to prevent overspray or to maintain clean edge detail. Check weather conditions to be certain rain or dew is not imminent before product has the opportunity to dry fully after application. Apply product by 3/8″ FOAM PRO open foam texture roller (available through Acry-Tech), hopper gun, or disposable FOAM brush. Apply light first coat, allow coating to tack, and then follow with heavier full coat. Clean up spills and tools with water. Thin if necessary with clean water only.


To clean the surface and maintain the beauty of Safe Tread, use general purpose cleaners such as: Tri Sodium Phosphate (TSP), Laundry Detergent (Tide Powder is best!), Citrus Orange Cleaners, diluted commercial degreasers, Formula 409, Simple Green or similar type products. Dilute bleach of caustic cleaning solution can also be used sparingly. For best results apply cleaner at recommended dilution rate and scrub lightly with a stiff bristle deck brush. Rinse thoroughly when cleaning is complete. Automatic scrubbers can also be used for large areas. With automatic scrubbing equipment, use light pad pressure only!

Effective September 2011



Safety Orange, Safety Yellow, Safety Red to meet the needs of Safety Purposes.

Safety Yellow
Safety Orange
Safety Red

Please Note: Coating Colors may vary displayed online may vary due to printing and web viewing.

NEWS FLASH! Safe Tread is now available in a NEW, Clear Formula for use on decorative, stained concrete or natural wood surfaces to create a safe, NON SKID surface while allowing the beauty of the underlying surface to show through. Call our office at 800-771-6001 to get more information. Get great NON SKID properties for less than $0.45 per square foot. Call today for more information.



There are no reviews yet.

Be the first to review “Safe Tread Anti Slip Coating – Safety Colors”

Your email address will not be published. Required fields are marked *