Anti-Slip Coatings

Safe Tread Anti-Slip Coating – Standard Colors



SKU: N/A Category: GTIN:

Safe Tread Anti Slip Coating

Anti-slip coating, Non-Skid Coating, Non-Slip Coating—this description is generic, and we call the concept by many names, but to increase traction, prevent slips or falls, and generally create a safe footing, that’s exactly what our products do best!

Safe Tread can create an anti-skid floor treatment, non-skid stair treads, high-grip loading ramps, and rooftop walkways for flat roofs. It’s so easy to apply; roll it on with a texture roller, creating a beautiful texture! It’s a maximum grip coating that’s environmentally friendly and user-friendly. It creates an incredibly effective anti-slip, non-skid surface on clean, dry, prepared substrates. Safe Tread is flexible, so it’s chip, scuff, and impact resistant, which means a long service life. It is cured by evaporation, and air dries quickly. It is also NONFLAMMABLE for safe application. While we provide Safe Tread in several standard colors, we can match almost any color so you can enjoy a unique color scheme. It contains no Silica, so it’s user-friendly! And it’s a ZERO VOC product.

Reasons Why Many Use Safe Tread Anti-Slip Coatings:

Safe Tread is a unique anti-slip coating because it contains no silica, which can cause respiratory problems. The heavy grit that provides superior traction and non-slip properties will not settle out in the container or clump during application. It’s easy to apply with one of our unique texture rollers; it’s water-based, so clean-up is easy and does not require exotic safety equipment for a safe application. Considering the ease of use, easy water cleanup, and lack of expensive safety equipment, solvents, or reducers, Safe Tread is much cheaper than most other safety coating options, as it covers about 60 square feet per gallon.

Where To Use Safe Tread Anti-Slip Coatings:

Safe Tread has proven tough enough for a variety of applications. Its anti-slip Coatings will withstand extreme service environments and deliver uncompromised performance.

  • Military Installations
  • Hospitals
  • Subway Cars
  • Public School Ramps
  • Forklift Ramps
  • Locomotives
  • Industrial Plants

Material costs are generally between $0.75 to $1.50 per square foot, depending on the applied rate and the chosen color.

For optimal results, we recommend using our texture rollers. 


Product SKU GTIN
Black 1 Gallon SAT-1-BK 810094630539
Black 5 Gallons SAT-5-BK 810094630546
Brick Red 1 Gallon SAT-1-BR 810094630515
Brick Red 5 Gallons SAT-5-BR 810094630522
Cream 1 Gallon SAT-1-CR 810094630997
Cream 5 Gallons SAT-5-CR 810094631000
Dark Blue 1 Gallon SAT-1-DBL 810094630492
Dark Blue 5 Gallons SAT-5-DBL 810094630508
Dark Brown 1 Gallon SAT-1-DBR 810094631086
Dark Brown 5 Gallons SAT-5-DBR 810094631055
Dark Gray 1 Gallon SAT-1-DG 810094630980
Dark Gray 5 Gallons SAT-5-DG 810094631093
Light Gray 1 Gallon SAT-1-LG 810094630942
Light Gray 5 Gallons SAT-5-LG 810094630959
Medium Gray 1 Gallon SAT-1-MG 810094630966
Medium Gray 5 Gallons SAT-5-MG 810094630973
Sand 1 Gallon SAT-1-SA 810094631017
Sand 5 Gallons SAT-5-SA 810094631024
Tan 1 Gallon SAT-1-T 810094631031
Tan 5 Gallons SAT-5-T 810094631048
Waterpark Blue 1 Gallon SAT-1-WBL 810094630461
Waterpark Blue 5 Gallons SAT-5-WBL 810094630478
Yacht White 1 Gallon SAT-1-YW 810094630911
Yacht White 5 Gallons SAT-5-YW 810094630935

Additional information

Weight 64 lbs
Dimensions 12 × 12 × 15 in
Standard Colors

, , , , , , , , , , ,



Technical Info



ONE COMPONENT WATER-BASED (No mixing, no measuring needed!)

  • Vehicle: Proprietary Blended TerPolymer Latex
  • Solids Volume: 61%
  • Texture Yield: 85% of wet film when dried
  • Wt / Gal.: 11.2#
  • V.O.C.: 0.00# / gal (0.0g/L), = ZERO V.O.C.
  • Cures by: Air Drying
  • Visc: 12 to 15 Kcps
  • Fillers: High Tensile Strength Suspended Grit
  • Toxicity: NON-TOXIC & relatively odorless.


  • UV Resistant – Shelf Life: >1 yr – High Adhesion (ASTM D-4541-95)
  • Fire Resistant – Low Sheen Finish – Hot Tire Resistant
  • Impact Resistant (ASTM D-2794) – Wear Resistant (ASTM F-510)
  • Available in: 1 or 5 gallon pails.
  • Spread Rate: 40 to 80 SF/Gal total in 2 coats.


Click here for some important information: Soft Tread & Safe Tread Application Guide


Safe Tread can be applied at surface temperatures between 50°F and 110°F. Application is not recommended when surface temperature is below 50°F or soon to fall below that temperature. Prepare surfaces by pressure washing and removal of all dirt, grease, loose paint, rust, efflorescence or other contaminants. Etch new concrete after 30 day curing, sand fiberglass, prime bare metal or wood. All surfaces must be clean, dry and “paint ready” before application. All new treated wood must be seasoned, or weathered, for a minimum of 6 months before applying Safe Tread Anti-Slip Coating. Composite lumber must be rigorously pressure washed prior to application and will require a special high adhesion primer. Call us for more info about composite lumber applications.

Mask off area to be coated to prevent overspray or to maintain clean edge detail. Check weather conditions to be certain rain or dew is not imminent before product has the opportunity to dry fully after application. Apply product by 3/8″ FOAM PRO open foam texture roller (available through Acry-Tech), hopper gun, or disposable FOAM brush. Apply light first coat, allow coating to tack, and then follow with heavier full coat. Clean up spills and tools with water. Thin if necessary with clean water only.


To clean the surface and maintain the beauty of Safe Tread, use general purpose cleaners such as: Tri Sodium Phosphate (TSP), Laundry Detergent (Tide Powder is best!), Citrus Orange Cleaners, diluted commercial degreasers, Formula 409, Simple Green or similar type products. Dilute bleach of caustic cleaning solution can also be used sparingly. For best results apply cleaner at recommended dilution rate and scrub lightly with a stiff bristle deck brush. Rinse thoroughly when cleaning is complete. Automatic scrubbers can also be used for large areas. With automatic scrubbing equipment, use light pad pressure only!

Effective September 2011



Colors available for Soft Tread include Cream, Dark Blue, Sand, Light Green, Water Blue, Dark Brown, Dark Green, Medium Blue, Tan, Light Gray, Medium Gray, Yacht White, Brick Red, Black, and Dark Gray.

We also have Safety Orange, Safety Yellow,Safety Red to meet the needs of Safety Purposes.

Yacht White
Light Gray
Medium Gray
Dark Gray
Dark Brown
Waterpark Blue
Dark Blue
Brick Red

Please Note: Coating Colors may vary displayed online may vary due to printing and web viewing.



There are no reviews yet.

Be the first to review “Safe Tread Anti-Slip Coating – Standard Colors”

Your email address will not be published. Required fields are marked *