Elasto-Fill

Brush Grade Waterproof Elastomeric Patching Compound

Surface Preparation:

All surfaces must be free from loose coatings, chalk, biological growth, oil, rust, or other
contaminants. Prime chalking surfaces with Acry-Tech’s AquaGuard Bonding Primer.
Application: Apply generously by brush. Heavy applications over 1⁄4” will skin over but dry more slowly due
to the depth of the coating. In areas of extreme movement, embed PolyMat reinforcing fabric into a wet layer of
Elasto-Fill and apply a second coat when thoroughly dry. Do not apply this coating to a wet surface or when rain
or evening dew is imminent. Do not apply late in the day or when the surface temperature is below 50 F.
Wash spills and tools with soapy water.

Technical Data: Non-Slumping Formula for Minimal Less Shrinkage VOC: 7g/L = ZERO
Solids by Volume: 67% Weight per gallon: 6.0# Viscosity: 55,000 cps Elongation: Over 200%

HMIS Ratings: HEALTH 1 FLAMMABILITY 0 REACTIVITY 0 PERSONAL PROTECTION: HANDLING B APPLICATION G

Cautions: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE, KEEP OUT OF THE REACH OF CHILDREN! AVOID EYE CONTACT. WEAR GOGGLES.