Have questions about our products? You’re in the right place.

At Acry-Tech Coatings, we offer a comprehensive range of high-performance coatings for speaker cabinets, road cases, roofing systems, boats, and various industrial applications. Whether you’re wondering how to apply DuraTex, where to use Roof Seal Premium, or how Safe Tread Clear enhances non-slip safety, we’ve got you covered. Explore our most commonly asked questions to find product information, application tips, and expert advice.

We specialize in water-based, eco-friendly coatings that are tough, long-lasting, and made in the USA. From elastomeric roof coatings to sound-damping paints and anti-slip solutions, our goal is to help you protect, seal, and enhance with confidence.

Q: How do I open the gallon bucket?

A: We made a video to help. See below.

Q: What surface can we apply it to?

A: You can apply to wood, concrete, tiles, and metal.

Q: Can I coat asphalt?

A: At this time, we do not have a primer that adheres to asphalt, but we are currently working on developing one to address this issue.

Q: What kind of formula is in the coating?

A: 100% acrylic formula, ensuring strong adhesion across diverse surfaces

Q: How much does 1 gallon cover?

A: It covers an impressive 150 to 225 square feet per gallon.

Q: How many coats do I apply?

A: We recommend two coats with our textured roller. One coat is going north and south, and the second coat is going east to west.

Q: Do you need primer?

A: We do recommend using a water-based primer. For all surfaces, we recommend our Soft and Safe Tread primer. For metal, we recommend Zinsser’s water-based primer.

Q: Can I use the coating at any temperature?

A: No. The surface temperature should be 65 degrees or greater.

Q: What grit is in the color Safety Tread?

A: All Safety Tread colors come with coarse grit.

Q: Can I use any brush to apply?

A: No. We recommend using our textured roller due to its building formula.

Q: Can I use a spray gun?

A: Yes, the hopper gun with a 1/4 inch opening cap.

Q: Do I need to let the coating dry before I apply a second coat?

A: Yes, depending on the temperature and humidity. Our products are water-based and can air dry. Generally, you can reapply a second coat within an hour, with a full cure achieved within 3 days.

Q: Is Safe Tread coating waterproof?

A: No, it’s water resistant.

Q: Is Safe Tread UV protective?

A: UV coating can be added with an extra charge.

Q: Can I get Safe Tread in any colors?

A: No. We can’t do any metallic or pearl colors (iridescence).

Q: What do I need to provide if I want custom colors?

A: You will need brand and color numbers. Example: Sherwin-Williams Dover White SW6385

COATING APPLICATION & MAINTENANCE:

Click here for some important information: Soft Tread & Safe Tread Application Guide.

COATING APPLICATION:

Safe Tread can be applied to surfaces with temperatures between 50°F and 110°F. Application is not recommended when the surface temperature is below 50°F or is soon to fall below that temperature. Prepare surfaces by pressure washing and removal of all dirt, grease, loose paint, rust, efflorescence, or other contaminants. Etch new concrete after 30 days of curing, sand fiberglass, and prime bare metal or wood. All surfaces must be clean, dry, and “paint-ready” before application. All new treated wood must be seasoned or weathered for a minimum of 6 months before applying Safe Tread Anti-Slip Coating. Composite lumber must be rigorously pressure-washed before application and will require a special high-adhesion primer. Call us for more info about composite lumber applications.

Mask off the area to be coated to prevent overspray or to maintain clean edge detail. Check weather conditions to ensure rain or dew is not imminent before the product has a chance to dry thoroughly after application. Apply the product using a 3/8″ FOAM PRO open foam texture roller (available through Acry-Tech), a hopper gun, or a disposable foam brush. Apply a light first coat, allow the coating to tack, and then follow with a heavier full coat. Clean up spills and tools with water. Thin if necessary with clean water only.

COATING MAINTENANCE:

To clean the surface and maintain the beauty of Safe Tread, use general-purpose cleaners such as Tri-Sodium Phosphate (TSP), Laundry Detergent (Tide Powder is best!), Citrus Orange Cleaners, diluted commercial degreasers, Formula 409, Simple Green, or similar products. Dilute bleach or caustic cleaning solution can also be used sparingly. For best results, apply cleaner at the recommended dilution rate and scrub lightly with a stiff-bristle deck brush. Rinse thoroughly when cleaning is complete. Automatic scrubbers can also be used for large areas. With automatic scrubbing equipment, use light pad pressure only!