This is Everything You Need To Know. If There Is Still something we Need To Include, please feel free to let us know.
Q: How do I open the gallon bucket?
A: We made a video to help. See below.
Q: What surface can we apply to?
A: You can apply to wood, concrete, tiles, metal.
Q: Can I coat asphalt?
A: At this time we don’t have a primer that will adhere to asphalt, but we are currently working on a primer to fix this issue.
Q: How do I know which grit to pick?
A: Fine grit would provide minimal traction and safe to walk bare foot on surface. Medium grit would provide medium traction and safe to walk bare foot on surface. Coarse grit has the maximum traction and would require wearing shoes to walk on surface.
Q: What kind of formula is in coating?
A: 100% acrylic formula, ensuring strong adhesion across diverse surfaces
Q: How many coats do I apply?
A: We recommend 2 coats with our textured roller. One coat going north and south and the second coat going east to west.
Q: How many coats per square feet?
A: Covers an impressive 150 to 225 square feet per gallon
Q: What kind of finish when dry?
A: Low Sheen Finish
Q: Do you need primer?
A: We do recommend using a water-based primer. For all surface, we recommend our Soft and Safe Tread primer. For metal, we recommend any water-based primer but make sure it dries clear.
Q: Can I use coating in any temperature?
A: No. The surface temperature should be 65 degrees or greater.
Q: Can I use any brush to apply?
A: No. We recommend using our textured roller because of the building formula.
Q: Can I use a spray gun?
A: Yes, the hopper gun with a 1/4 inch opening cap.
Q: Do I need to let coating dry before I apply second coat?
A: Yes, depending on the temperature and humidity. Our products are water-based and can air dry. Generally, you can reapply second coat within an hour. A full cure achieved within 3 days.
Q: is Safe Tread Clear coating waterproof?
A: No, it’s water resistant.
Q: is Safe Tread UV protective?
A: Yes.
Q: Can I get Safe Tread Clear in any colors?
A: No. This only comes in clear. You can check out our Safe Tread which comes in standard, safety, and custom colors.
More info on application and maintenance:
APPLICATION INFORMATION:
Safe Tread CLEAR can be applied at surface temperatures between 60°F and 110°F. Application is not recommended when surface temperature is below 60°F or soon to fall below that temperature. Prepare surfaces by pressure washing and removal of all dirt, grease, loose paint, rust, efflorescence, dead wood fibers or other contaminants. All new treated wood must be seasoned, or weathered, for a minimum of 6 months before applying Safe Tread Clear. Etch new concrete after 30 day curing, lightly sand fiberglass gel coat. Ceramic tiles must be acid etched to remove the glassy finish prior to coating. All surfaces must be clean, dry and “paint ready” before application. Stir Safe Tread Clear to incorporate all the non skid particles and create a homogenous material. Stir again if product sits without agitation for one hour.
Mask off area to be coated to maintain clean edge detail. Check weather conditions to be certain rain or dew is not imminent before product has the opportunity to dry fully after application. Stir well before using. Apply product evenly with our blue textured foam rollers (available in 9” and 4” sizes). Dilute if needed with clean water and dilute sparingly. For heavier traffic areas, apply a second coat when dry to the touch. Clean up spills and tools with water.
MAINTENANCE:
To clean the surface and maintain the beauty of Safe Tread CLEAR, light pressure rinsing is generally sufficient. If needed, use general purpose cleaners such as: Tri Sodium Phosphate (TSP), Laundry Detergent (Tide Powder), Citrus Orange Cleaners, Formula 409, Simple Green, or similar type products to remove oily deposits or other foreign matter. For best results apply cleaner at the recommended dilution rate and scrub lightly with a stiff bristle deck brush. Rinse thoroughly when cleaning is complete.