Have questions about our products? You’re in the right place.
At Acry-Tech Coatings, we offer a comprehensive range of high-performance coatings for speaker cabinets, road cases, roofing systems, boats, and various industrial applications. Whether you’re wondering how to apply DuraTex, where to use Roof Seal Premium, or how Safe Tread Clear enhances non-slip safety, we’ve got you covered. Explore our most commonly asked questions to find product information, application tips, and expert advice.
We specialize in water-based, eco-friendly coatings that are tough, long-lasting, and made in the USA. From elastomeric roof coatings to sound-damping paints and anti-slip solutions, our goal is to help you protect, seal, and enhance with confidence.
Q: How do I open the gallon bucket?
A: We made a video to help. See below.
Q: What surface can I apply CeramaX to?
A: Tile, Bermuda, Shingle, Poured Concrete, Sloped Gravel Roofs, Metal Roofs, Flat Roofs, 90# Roofing, Stucco Walls, Fiberglass 3ply, Bus Tops, Truck & Van Tops, Shipping Containers, Ice Storage Building, and Industrial Equipment
Q: How many coats do I apply?
A: We recommend 2 coats, either with a roller or brush.
Q: Is this coating waterproof?
A: Yes.
Q: Do you need primer?
A: We recommend AquaGuard Primer. Apply Therm-X as a base coat to fill cracks and gaps between tiles & shingles.
Q: Can I paint over CeramaX?
A: Yes, with lighter color paint. Dark colors hold heat.
Q: Can I paint on asphalt shingles?
A: Yes, but you will need to use Therm-X as a base coat.
Q: Can I use the coating at any temperature?
A: No. The surface temperature should be 55 degrees or greater.
Q: What can I use to apply the product?
A: Apply with an airless sprayer, brush, or roller and apply generously using overlapping strokes. Do not brush or roll excessively, as this can induce foam and compromise coating integrity. Textured and porous surfaces will require more coating.
Q: Do I need to let the coating dry before I apply a second coat?
A: Yes, depending on the temperature and humidity. Generally, you can reapply a second coat within an hour, with a complete cure achieved within 3 days.
Q: Is CeramaX UV protective?
A: Yes.
Q: Can I get CeramaX in any colors?
A: No.
For more info:
- Viscosity Brookfield 10 rpm: 25– 30 Kcps
- Wt Per Gallon: 7.6 # per gallon
- Percent Solids: 57% Vol. 56% Wt
- Film Yield: 100 sf per gal. = 16 wet mils per coat, = 9.1 dry mils per coat (TWO COATS RECOMMENDED)
- Hiding Pigment: Pure Bright White Reflective Titanium
- Lead and chromate free: Yes
- Resin Vehicle Type: Acrylic Polymers – Acry-Tech Proprietary Blend
- Cures by: Evaporation and Cross-Linking Coalescence
- Color: Bright Reflective White
- Hiding: Excellent at 10 dry mils
- Gloss: Low Sheen Velvet Finish
- VOC Emissions: ONLY 18 grams/liter (.15 lb./gallon) = ZERO
- UV Resistance: Excellent
- Fungus / Mildew Resistance: Very High (Contains our unique Bioquell™ System)
- Dry Time: To Touch – 50 min.@ 70% Relative Humidity
- Dry Time to Recoat: 3 hours depending on humidity levels
- Dry Time To Fully Cured: 7 days
- Shelf Life: 1 year
- Clean up: Soap and Water on wet material.
- Thinner: Add a small amount of water if needed.