Heat Reduction Coatings: Cool Top

Cool Top is a long lasting white acrylic roof coating that dramatically cuts heat, effectively increasing the life of asphalt, shingle or modified bitumen roofs. You get great durability and beauty while the bright white (“non-browning”) finish reflects the suns heat, dramatically lowering the temperature of the roof compared to typical aluminum pigmented asphalt coatings.

During the summer months, typical flat roofs can heat up to 150 degrees or more. This extreme heat causes higher air conditioning bills and actually deteriorates your roof quickly. After coating the roof with Cool Top, your roof temperature will be reduced to be within only a few degrees of air temperature and will preserve your roof.

When your roof stays cooler, the essential oils within the asphalt don’t bake and dry out and that means your roof will last longer! AND, the cooler surface of the roof makes the structure cooler and more comfortable and puts less strain on you’re A/C system, while saving money on air conditioning costs.

Cool Top lasts years longer than aluminized asphalt coatings and can be applied with airless spray equipment OR you can simply roll it on.

The hi-tech Cool Top formula, designed specifically for asphaltic surfaces, bonds exceptionally well and resists browning, staying white while standing up to puddling water which is common to most flat roofs. Use Cool Top on Flat or Sloped Asphalt, Asphalt Shingles and Modified Bitumen Roofs whether smooth surfaced or granulated.

UV Resistance, Ponding Resistance, High Reflectivity, Roof Preservation, Heat Reduction…

You get it all with Cool Top!

Surface Preparation:

Surfaces must be clean and free of all loose or chalking paint, loose granules, and all biological growth and oxidation. Pressure wash to remove dirt, loose or chalking coatings, oxidation and biological growth. 

Application:

Cool Top can be applied by airless sprayer, brush or roller. Apply one coat at 100 sf per gallon or a two coat application at 200 square feet per gallon in each of two coats. This will give the best coverage and will result in the longest lasting results. Do not apply this coating to a wet surface, when rain or evening dew is imminent, or when surface temperature is or will be below 50°F. Wash spills and tools with soapy water.

Technical Data:

Wt per gal.(#) 11.5
Color – Bright White 
UV Resistance - Excellent!

Recommended Use Rate:
Smooth Asphalt-100 sf / gal. Granulated-100 sf / gal. (total 2 coat usage)

HMIS Ratings: HEALTH 1    FLAMMABILITY 0    REACTIVITY 0                         PERSONAL PROTECTION: HANDLING B       APPLICATION G

Cautions: KEEP FROM FREEZING. USE ONLY WITH ADEQUATE VENTILATION. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH OF CHILDREN! CONTAINS CRYSTALLINE SILICA. WEAR NIOSH APPROVED MASK IF APPLYING IN CONFINED AREA. AVOID EYE CONTACT. WEAR GOGGLES.

Packaging Availability: Available in 5’s or in drums as special order.